- 43
- 2 896 395
Zaber Technologies
Canada
Приєднався 13 лис 2008
Zaber provides time-saving, cost-effective positioning devices for automating photonics, life science, and industrial systems quickly. Our lineup of motorized modular linear, rotary, vertical stages, and microscopy modules can be combined to build cartesian systems, gantries, gimbals, automated microscopes, and much more.
Our mission is to simplify motion control. Zaber devices work right out of the box, can be set up in minutes using a GUI based application, and controlled with our powerful yet intuitive API. We offer 1-2 week lead times, 99% on-time delivery, and respond to inquiries within 1 day.
Visit us at www.zaber.com
Our mission is to simplify motion control. Zaber devices work right out of the box, can be set up in minutes using a GUI based application, and controlled with our powerful yet intuitive API. We offer 1-2 week lead times, 99% on-time delivery, and respond to inquiries within 1 day.
Visit us at www.zaber.com
Motorized Rotary Stages for Plug and Play Automation
Automate your photonics, life science, or industrial systems with Zaber rotary stages.
-A wide selection of stage top diameters, accuracies, repeatabilities, max loads, max speeds, and more.
-Easily mounts to Zaber linear stages, tip/tilt devices, and rotary stages for multi-axis rotary systems.
-Clear apertures that can be used as an unobstructed optical path or for easier cable management.
-Easy setup in minutes with our free Zaber Launcher Software.
-Fast lead times of under 1 week for standard products to get you started quickly.
-Support from our application engineers within 1 business day of contacting us.
Learn more at www.zaber.com/products/rotary-stages?.com&Z-UdxVttrG4
-A wide selection of stage top diameters, accuracies, repeatabilities, max loads, max speeds, and more.
-Easily mounts to Zaber linear stages, tip/tilt devices, and rotary stages for multi-axis rotary systems.
-Clear apertures that can be used as an unobstructed optical path or for easier cable management.
-Easy setup in minutes with our free Zaber Launcher Software.
-Fast lead times of under 1 week for standard products to get you started quickly.
-Support from our application engineers within 1 business day of contacting us.
Learn more at www.zaber.com/products/rotary-stages?.com&Z-UdxVttrG4
Переглядів: 81
Відео
Automate Faster (and Cheaper!) with Zaber Linear Stages
Переглядів 549Місяць тому
An extensive range of time-saving and cost-effective linear stages for automating photonics, life science, and industrial processes. -Choose from a wide selection of standard products with options for travel lengths, load capacities, maximum speeds, accuracies, repeatabilities, and drive mechanisms. - Build single and multi-axis systems with our modular devices. - Easy setup in minutes with our...
Building Custom Motion Systems Just Got Easier!
Переглядів 1602 місяці тому
Easily design and build your own system with interchangeable, high-precision stages. See how our modular stages empower how easy it is to build: -XY, XYZ, tip/tilt configurations and more -Tailored motion systems -Seamless integration with minimal hardware expertise
Plug & Play: Set up a 3 axis motion system in under 3 minutes!
Переглядів 3162 місяці тому
Get started with Zaber stages in minutes. This short video demonstrates how it takes less than 3 minutes to set up, connect, and start running 3 devices.
Ultra Precision Automated Microscopy with ADR Low Profile XY Stage
Переглядів 6154 місяці тому
In many life science research and industrial biology applications, the ability to deliver repeatable and reproducible results quickly is critical. With 5 µm accuracy and 500 nm repeatability, the X-ADR-E microscopy stage allows you to achieve single-cell consistency at high magnifications and perform reliable long-term experiments like time-lapse microscopy. Additionally, the 750 mm/s top speed...
Introducing the Nucleus™ microscopy platform.
Переглядів 9 тис.5 місяців тому
A complete set of interchangeable hardware modules and software tools for OEMs and lab managers to build customized fluorescence microscopes and optical subsystems. - Capture clear and detailed epifluorescence, brightfield, and phase contrast images - Design for speed (scan 96-well plates at 5x in 3.8 seconds) or capacity (scan up to 6 microplates at once). - Build your system in just a few cli...
High Speed Nucleus™ Fluorescence Microscope Scans a Microplate in 3.8 seconds
Переглядів 1,5 тис.6 місяців тому
What happens when you marry an ultra-fast microscope with the latest TDI sCMOS camera? You can scan a microplate in a mere 3.8 seconds. In many life science research and industrial biology applications capturing more image data faster can greatly reduce the duration of experiments or deliver a significant competitive advantage for OEM device manufacturers. Increase your imaging throughput by 10...
Cartesian robot with vertical T-Bot drive configuration
Переглядів 10 тис.10 місяців тому
This is a custom designed cartesian robot destined for a liquid handling application. It's built around our LC40 family of belt driven linear stages (see www.zaber.com/products/families/LC40?.com&WLCO45at7S8) and uses what's known as a T-Bot configuration for the Z axis to avoid the weight and wiring nightmare of having to raise and lower the Z-axis motor. The configuration we implemented is a ...
XYZ Gantry Stages - Automated Microplate Handling Demo
Переглядів 2,7 тис.Рік тому
Zaber designs and manufactures custom, modular XY and XYZ gantry stages, also called cartesian robots or gantry kits. The system shown here uses a combination of high precision motorized linear stages, a motorized rotary stage and a motorized gripper to demonstrate a possible application for automated microplate handling. this gantry provides accurate and repeatable control of 5 axes of motion ...
XYZ Gantry System - Pick and Place and Precision Handling Demo
Переглядів 14 тис.Рік тому
Zaber designs and manufactures custom, modular XY and XYZ gantry systems, also called cartesian robots or gantry kits. The system shown here uses a combination of high precision motorized linear stages, a motorized rotary stage and a motorized gripper to demonstrate a possible pick and place solution. This robot provides accurate and repeatable control of 5 axes of motion (3 linear, 1 rotation,...
ZX Day 2022 - An annual part of work-life at Zaber
Переглядів 1,6 тис.Рік тому
Curious about life at Zaber? Check out this annual special event, where teams use their creative skills to work on projects that push outside the boundaries of their everyday work. The only guideline is to "add-value". To learn more, visit our careers page: www.zaber.com/careers?.com&Fj71P9scJOo. #culture #creativity #innovation #vancouver
Motorized Objective Turret
Переглядів 2,3 тис.Рік тому
Prototype of a motorized objective turret and automated objective changer for use with our microscope products www.zaber.com/products/microscopes?.com&Vfx1ZPJBBhI. Each objective is loaded/unloaded in isolation allowing fast focus or Z-stacking moves (and thus faster image capture) as a single objective has low mass compared to raising/lowering the the entire turret.
Zaber Technologies X-LSQ Series Motorized Linear Stages with Built-in Controllers
Переглядів 19 тис.8 років тому
Zaber Technologies X-LSQ Series Motorized Linear Stages with Built-in Controllers
Zaber Technologies Multi-Axis XY Linear Stage System
Переглядів 81 тис.8 років тому
Zaber Technologies Multi-Axis XY Linear Stage System
Zaber Technologies X-VSR Series Vertical Lift Stages with Built-in Controllers
Переглядів 1,6 тис.8 років тому
Zaber Technologies X-VSR Series Vertical Lift Stages with Built-in Controllers
Zaber Technologies X-LSM Series: Miniature Motorized Linear Stages with Built-in Controllers
Переглядів 35 тис.8 років тому
Zaber Technologies X-LSM Series: Miniature Motorized Linear Stages with Built-in Controllers
Zaber Technologies Low-Profile, Fine Resolution XYZ System
Переглядів 3,4 тис.8 років тому
Zaber Technologies Low-Profile, Fine Resolution XYZ System
Zaber Technologies Custom XYZ-Theta Gantry with Grippers
Переглядів 2,6 тис.8 років тому
Zaber Technologies Custom XYZ-Theta Gantry with Grippers
Zaber Technologies Custom XYZ System
Переглядів 6 тис.8 років тому
Zaber Technologies Custom XYZ System
Zaber Robots Perform "Carol of the Bells"
Переглядів 8 тис.10 років тому
Zaber Robots Perform "Carol of the Bells"
Zaber Technologies G-LSQ XYZ Gantry System
Переглядів 1,9 тис.12 років тому
Zaber Technologies G-LSQ XYZ Gantry System
Zaber Technologies A-LST-C Heavy Duty Stage with Dust Cover
Переглядів 1,2 тис.12 років тому
Zaber Technologies A-LST-C Heavy Duty Stage with Dust Cover
Zaber's XYZ Series Three-Axis Stages with Built-in Controllers
Переглядів 5 тис.13 років тому
Zaber's XYZ Series Three-Axis Stages with Built-in Controllers
Zaber's T-MM2 Motorized Mirror Mounts with Built-in Controllers
Переглядів 1,7 тис.13 років тому
Zaber's T-MM2 Motorized Mirror Mounts with Built-in Controllers
Zaber's Miniature Motorized Linear Stages with Built-in Controllers
Переглядів 2,6 тис.13 років тому
Zaber's Miniature Motorized Linear Stages with Built-in Controllers
Zaber's T-XY-LSM Series Two-Axis Stages
Переглядів 2,4 тис.13 років тому
Zaber's T-XY-LSM Series Two-Axis Stages
Se puede usar en la construcción de edificios
Now introducing, the railing spider.
Crazy Frog is that You?????
bing bing
Why is the grabber so loud?
that's cool, what's it used for? looks like a pick and place machine for light objects
I'm used to seeing inverse-kinematics it games, interesting to see it in reverse.
is it open loop control ?
Thanks for the inquiry. The system shown in this video is open loop. However, encoder options are available on most of our linear and rotary devices. These can be used to assemble closed-loop gantry systems if desired.
😮
Thank you for sharing your video. I hadn't realized that there were only 3 moving parts!
roboticists try not to make random useless bullshit challenge
I do, thats chess
Love it hate the pinch points. Design out the pinch points and patent.
This is cool
It looks cool, but using binding force to position the head is a bad design. The joints will eventually grind, and the head wont get to the desired position.
Awesome!
I cant believe I got stick-bugged by a robot
なんか可愛い❤
4 degrees of movement for that many degree of movement... sceawy
For some reason he reminds me a lot of Strider from Half Life 2
3d printing gonna be wild now
Do any of you know any ressources for how to compute the inverse kinematics for a Multipteron
How can i get one of these for a glassblowing torch for a lathe!?!?!?!?😮
Thank you for the Breakdown. As a robotician i was trying to figure out how you could control it :)
I hear the movie Irobot is coming to life
The fluidity of its movement, plus the force that it appears able to generate, make me wonder about, and hopeful for its potential in medtech. What an elegant design. I wonder if it was inspired by a swimming frog.
Use it for 3d printing head,
Great
Better with 2 arms
reminds me of that frog music video the way it moves
Can you show the acceleration speeds of this?
Crazy how just adding a line our brains create an entire being dancing on a limb
So it's like the portal building spider robot in spider Man across the spider verse!?
froggy...
Very very cool :)
What kind of machine made the blocks and links? Really I to Machining and custom parts, not so much robotics but still a really nice piece!!
It's a stick bug, make it dance
why this looks like a spoder?
that things gotta have horrible precision under any load, it would probably be very expensive as all the parts would need to be zero tolerance machined
❤
La creatura
Motion system for racing/flying simulators
Metal forg
Did i just get stick bugged by a robot
I love how you added the smiley to make it friendly :)
The coordinated swinging movement gives the impression of something living. Very cool!
Tht would work in a concubine machine, but wht axis would this be called??????? Tht would literally carve ant shape if it had tooling
But can it draw a perfect circle?
Its like a giant stick on a game controler just over designed. Up down left right lol
Would be good as a z axis , add extra flexibility and additional capabilities on a 3 axis table CNC
This is arguably the coolest single plane 3-axis control system I've seen. What's your Z-axis capacity (kilos)?
This guy can lift a 45 lb plate, but it's pretty wobbly at that payload and very slow to move.